What Is an RF Antenna Input?

by Timothy Smithee
Cable connects RF antenna Input to TVs and other video-playing devices.

Cable connects RF antenna Input to TVs and other video-playing devices.

Hemera Technologies/AbleStock.com/Getty Images

RF Antenna input is typically used to connect a television antenna, cable TV wire, or satellite feed to a television, VCR, or other device that can process radio-frequency video signals, including some computers. Knowing when to use an RF signal and how it differs from other signals can be useful when setting up some computer and video systems.

RF Signals

A radio frequency (RF) signal is an electrical signal emitted as a radio wave. It travels from the broadcasting antenna to the receiving antenna. Different channels carry the signal at different frequencies. Depending on conditions, the signal can be received as far as 80 miles from the broadcast antenna. An RF signal can also be carried on wires that have been configured appropriately, either from a nearby broadcast antenna or as part of a cable TV distribution system serving an area ranging from a building to a city.

Appearance

The most common RF input resembles a short, thick bolt about one-quarter inch in diameter and one-quarter inch long. The cable cord screws into the bolt. Older television sets may have two screws side by side, designed to attach wires from a cable called a twin lead. There is an electrical difference between the two forms of connector. An adapter may be required to attach twin lead wires to a round RF input or vice versa. The adapters are inexpensive and widely available.

Receiving RF Signals

A television image encoded as an RF signal contains audio and video, both of which are decoded using a tuner. The key difference between a monitor and a television set is that a monitor cannot process an RF signal directly. Most televisions, VCRs, and cable TV boxes let you output the decoded audio and video signal to other devices. Separating the video and audio signals gives better quality than the integrated RF signal; S-video, component video, and HDMI outputs offer higher quality than RF. For a computer to process RF signals it must have a video card equipped with an RF input plug, as well as other hardware and channel-selecting software.

Sending RF signals

Using an RF signal to carry audio and video from one device to another is an option of last resort, as it is always the lowest-quality option. However, with older television sets and VCRs, or in complex setups, RF may the only option available. Most VCRs, legacy game consoles, satellite receivers, and cable descramblers can accommodate an RF signal, typically on channel 3. External RF modulators are available to generate an RF signal from the video and audio outputs widely used on computers and audio-video devices.

Other RF Antenna Uses

RF signals are used for FM radio signals and Wi-Fi computer networks. FM radios and audio/video receivers may have an RF input for the radio antenna, or a connection for a cable system carrying FM radio signals. Wi-Fi antennas usually connect directly to the wireless transmitter.

About the Author

Timothy Smithee is a technical writer specializing in internal operating procedures for IT and manufacturing support. He has written for diverse publications including "RV Lifestyle" and "Everyman." He holds a Bachelor of Arts in English literature from the University of Western Ontario and a Bachelor of Arts in film studies from Carleton University.

Photo Credits

  • Hemera Technologies/AbleStock.com/Getty Images